The operating model is intended for studying
the running gear and transmission design. The operating model
should be operated in a closed room, the carrying structures can
carry additional load not less than 5 tons due to the weight of
the installed operating model. The ambient air temperature should
be within minus 5°C to plus 50°C.
|Description of parameters
|Operating model weight (without packing)
Operating model configuration and design
model (Fig. 1) consists of frame 1 imitating the front and rear
part of the left side and bottom of the tank. The frame carries
brackets of the track tension mechanism, suspensions and support
roller, balance beam rests, shock absorber rests axles and gearbox case
in a manner
similar to the welded-on pieces in the tank.
The front part includes idler 11 with
track tension mechanism, front suspension with road wheel 10 and
shock absorber 2.
The rear part includes gearbox 7 with driving
sprocket 6, rear suspension with road wheel 8, shock absorber 4 with
driving sprocket cleaner 5.
The frame middle part is equipped with track
support roller 3. A tree-link track section is also